[ICEM] ICEM to CFD++

Far · April 5, 2012, 05:01

Dear Frends

I am working on DLR F6 model. The tin and blk are downloaded from DPW. These files were made by PSYMN (ANSYS Inc.

My problem is that, I have no idea how to output the mesh file for CFD++ from ICEM output panel. I tried but getting boundary condition error.

PSYMN · April 5, 2012, 15:10

ICEM CFD supports so many formats (most of which I don't have access to) so I am not particularly expert at setting up bocos for most of them.

I can tell you the general process, and perhaps interpret your error (if you tell me what it said), but I don't really have an inside track on the bocos.

This is the info on that interface, it doesn't say much about the Bocos...

http://www.ansys.com/staticassets/AN...aces/CFD++.htm

Best regards,

Simon

April 5, 2012, 05:01	ICEM to CFD++	#1
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	Dear Frends I am working on DLR F6 model. The tin and blk are downloaded from DPW. These files were made by PSYMN (ANSYS Inc. My problem is that, I have no idea how to output the mesh file for CFD++ from ICEM output panel. I tried but getting boundary condition error.

April 5, 2012, 15:10		#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	ICEM CFD supports so many formats (most of which I don't have access to) so I am not particularly expert at setting up bocos for most of them. I can tell you the general process, and perhaps interpret your error (if you tell me what it said), but I don't really have an inside track on the bocos. This is the info on that interface, it doesn't say much about the Bocos... http://www.ansys.com/staticassets/AN...aces/CFD++.htm Best regards, Simon __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Icem CFD on Linux	mechanicaldesign	ANSYS Meshing & Geometry	7	March 11, 2021 19:44
Need help icem cfd	kakhtar	ANSYS Meshing & Geometry	25	January 31, 2017 01:09
Transport mesh from ICEM CFD, to Fluent, to Sysnoise	Wieland	FLUENT	2	April 15, 2012 06:28
Importing Solidworks part into ICEM CFD	MetalSupremacist	FLUENT	0	October 8, 2010 17:46
Which is better to develop in-house CFD code or to buy a available CFD package.	Tareq Al-shaalan	Main CFD Forum	10	June 12, 1999 23:27