|
[Sponsors] |
[ANSYS Meshing] Inflation smooth transition to triangular mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 19, 2017, 07:59 |
Inflation smooth transition to triangular mesh
|
#1 |
New Member
Ukraine
Join Date: Apr 2017
Posts: 3
Rep Power: 8 |
In attachment I uploaded my current mesh, but here I see a problem.
On the inner layer, I go from very small inflation elements within 1-2 elements to the full size of the mesh I defined via Sizing. How can I make this transition to the normal mesh smoother so there is not such a big difference in element size between the neighboring elements? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 03:19 |
Star CCM Overset Mesh Error (Rotating Turbine) | thezack | Siemens | 7 | October 12, 2016 11:14 |
[ANSYS Meshing] Mesh connection inflation layer with mesh in channel | lufrie | ANSYS Meshing & Geometry | 0 | February 6, 2015 07:46 |
[ANSYS Meshing] How to make structured mesh with correct inflation | Sfairat | ANSYS Meshing & Geometry | 2 | December 23, 2014 08:27 |
[ICEM] Transition layers from quad (or hexa) coarse mesh to quad (or hexa) fine mesh? | macfly | ANSYS Meshing & Geometry | 4 | February 10, 2014 06:09 |