CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS

how to make elements on lines

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 30, 2012, 10:28
Default how to make elements on lines
  #1
New Member
 
Davinder
Join Date: Feb 2012
Posts: 3
Rep Power: 4
rhythm_saini is on a distinguished road
Hello Friends,

I have a model which i have created in apdl using script using keypoints and lines.

i have created nodes on keypoints and now i want to create elements on lines.

please advise me how to do

thaks in advance.

here is some lines of script

/PREP7
K, 1, 3.366, 0.000, 7.327
K, 2, 3.293, 0.700, 8.548
K, 3, 3.366, 0.000, 9.769
K, 4, 3.366, 0.000, 2.442
K, 5, 3.293, 0.700, 3.663
K, 6, 3.366, 0.000, 4.884
K, 7, 2.723, 1.979, 6.105
K, 8, 3.293, 0.700, 6.105
K, 9, 2.252, 2.502, 7.327
K, 10, 2.723, 1.979, 8.548
K, 11, 1.040, 3.201, 9.769
K, 12, 2.252, 2.502, 9.769
K, 13, 3.366, 0.000, 0.000
K, 14, 2.723, 1.979, 1.221
K, 15, 3.293, 0.700, 1.221
K, 16, 2.252, 2.502, 2.442
K, 17, 2.723, 1.979, 3.663
K, 18, 1.040, 3.201, 4.884
K, 19, 2.252, 2.502, 4.884
K, 20, 0.352, 3.348, 6.105
K, 21, 1.040, 3.201, 7.327
K, 22, -1.040, 3.201, 8.548
K, 23, 0.352, 3.348, 8.548
K, 24, -1.683, 2.915, 9.769
K, 25, 1.040, 3.201, 0.000
K, 26, 2.252, 2.502, 0.000
K, 27, 0.352, 3.348, 1.221
K, 28, 1.040, 3.201, 2.442
K, 29, -1.040, 3.201, 3.663
K, 30, 0.352, 3.348, 3.663
K, 31, -1.683, 2.915, 4.884
K, 32, -1.040, 3.201, 6.105
K, 33, -2.723, 1.979, 7.327
K, 34, -1.683, 2.915, 7.327
K, 35, -3.075, 1.369, 8.548
K, 36, -2.723, 1.979, 9.769
K, 37, -1.683, 2.915, 0.000
K, 38, -1.040, 3.201, 1.221
K, 39, -2.723, 1.979, 2.442
K, 40, -1.683, 2.915, 2.442
K, 41, -3.075, 1.369, 3.663
K, 42, -2.723, 1.979, 4.884
K, 43, -3.366, 0.000, 6.105
K, 44, -3.075, 1.369, 6.105
K, 45, -3.293, -0.700, 7.327
K, 46, -3.366, 0.000, 8.548
K, 47, -2.723, -1.979, 9.769
K, 48, -3.293, -0.700, 9.769
K, 49, -2.723, 1.979, 0.000
K, 50, -3.366, 0.000, 1.221
K, 51, -3.075, 1.369, 1.221
K, 52, -3.293, -0.700, 2.442
K, 53, -3.366, 0.000, 3.663
K, 54, -2.723, -1.979, 4.884
K, 55, -3.293, -0.700, 4.884
K, 56, -2.252, -2.502, 6.105
K, 57, -2.723, -1.979, 7.327
K, 58, -1.040, -3.201, 8.548
K, 59, -2.252, -2.502, 8.548
K, 60, -0.352, -3.348, 9.769
K, 61, -2.723, -1.979, 0.000
K, 62, -3.293, -0.700, 0.000
K, 63, -2.252, -2.502, 1.221
K, 64, -2.723, -1.979, 2.442
K, 65, -1.040, -3.201, 3.663
K, 66, -2.252, -2.502, 3.663
K, 67, -0.352, -3.348, 4.884
K, 68, -1.040, -3.201, 6.105
K, 69, 1.040, -3.201, 7.327
K, 70, -0.352, -3.348, 7.327
K, 71, 1.683, -2.915, 8.548
K, 72, 1.040, -3.201, 9.769
K, 73, -0.352, -3.348, 0.000
K, 74, -1.040, -3.201, 1.221
K, 75, 1.040, -3.201, 2.442
K, 76, -0.352, -3.348, 2.442
K, 77, 1.683, -2.915, 3.663
K, 78, 1.040, -3.201, 4.884
K, 79, 2.723, -1.979, 6.105
K, 80, 1.683, -2.915, 6.105
K, 81, 3.075, -1.369, 7.327
K, 82, 2.723, -1.979, 8.548
K, 83, 3.075, -1.369, 9.769
K, 84, 1.040, -3.201, 0.000
K, 85, 2.723, -1.979, 1.221
K, 86, 1.683, -2.915, 1.221
K, 87, 3.075, -1.369, 2.442
K, 88, 2.723, -1.979, 3.663
K, 89, 3.075, -1.369, 4.884
K, 90, 3.075, -1.369, 0.000
L, 1, 2
L, 1, 8
L, 1, 81
L, 2, 1
L, 2, 3
L, 2, 10
L, 3, 2
L, 3, 83
L, 4, 5
L, 4, 15
L, 4, 87
L, 5, 4
L, 5, 6
L, 5, 17
L, 6, 5
L, 6, 8
L, 6, 89
L, 7, 8
L, 7, 9
L, 7, 19
L, 8, 1
L, 8, 6
L, 8, 7
L, 9, 7
L, 9, 10
L, 9, 21
L, 10, 2
L, 10, 9
L, 10, 12
L, 11, 12
L, 11, 23
L, 12, 10
L, 12, 11
L, 13, 15
L, 13, 90
L, 14, 15
L, 14, 16
L, 14, 26
L, 15, 4
L, 15, 13
L, 15, 14
L, 16, 14
L, 16, 17
L, 16, 28
L, 17, 5
L, 17, 16
L, 17, 19
L, 18, 19
L, 18, 20
L, 18, 30
L, 19, 7
L, 19, 17
L, 19, 18
L, 20, 18
L, 20, 21
L, 20, 32
L, 21, 9
L, 21, 20
L, 21, 23
L, 22, 23
L, 22, 24
L, 22, 34
L, 23, 11
L, 23, 21
L, 23, 22
L, 24, 22
L, 24, 36
L, 25, 26
L, 25, 27
L, 26, 14
L, 26, 25
L, 27, 25
L, 27, 28
L, 27, 38
L, 28, 16
L, 28, 27
L, 28, 30
L, 29, 30
L, 29, 31
L, 29, 40
L, 30, 18
L, 30, 28
L, 30, 29
L, 31, 29
L, 31, 32
L, 31, 42
L, 32, 20
L, 32, 31
L, 32, 34
L, 33, 34
L, 33, 35
L, 33, 44
L, 34, 22
L, 34, 32
L, 34, 33
L, 35, 33
L, 35, 36
L, 35, 46
L, 36, 24
L, 36, 35
L, 37, 38
L, 37, 49
L, 38, 27
L, 38, 37
L, 38, 40
L, 39, 40
L, 39, 41
L, 39, 51
L, 40, 29
L, 40, 38
L, 40, 39
L, 41, 39
L, 41, 42
L, 41, 53
L, 42, 31
L, 42, 41
L, 42, 44
L, 43, 44
L, 43, 45
L, 43, 55
L, 44, 33
L, 44, 42
L, 44, 43
L, 45, 43
L, 45, 46
L, 45, 57
L, 46, 35
L, 46, 45
L, 46, 48
L, 47, 48
L, 47, 59
L, 48, 46
L, 48, 47
L, 49, 37
L, 49, 51
L, 50, 51
L, 50, 52
L, 50, 62
L, 51, 39
L, 51, 49
L, 51, 50
L, 52, 50
L, 52, 53
L, 52, 64
L, 53, 41
L, 53, 52
L, 53, 55
L, 54, 55
L, 54, 56
L, 54, 66
L, 55, 43
L, 55, 53
L, 55, 54
L, 56, 54
L, 56, 57
L, 56, 68
L, 57, 45
L, 57, 56
L, 57, 59
L, 58, 59
L, 58, 60
L, 58, 70
L, 59, 47
L, 59, 57
L, 59, 58
L, 60, 58
L, 60, 72
L, 61, 62
L, 61, 63
L, 62, 50
L, 62, 61
L, 63, 61
L, 63, 64
L, 63, 74
L, 64, 52
L, 64, 63
L, 64, 66
L, 65, 66
L, 65, 67
L, 65, 76
L, 66, 54
L, 66, 64
L, 66, 65
L, 67, 65
L, 67, 68
L, 67, 78
L, 68, 56
L, 68, 67
L, 68, 70
L, 69, 70
L, 69, 71
L, 69, 80
L, 70, 58
L, 70, 68
L, 70, 69
L, 71, 69
L, 71, 72
L, 71, 82
L, 72, 60
L, 72, 71
L, 73, 74
L, 73, 84
L, 74, 63
L, 74, 73
L, 74, 76
L, 75, 76
L, 75, 77
L, 75, 86
L, 76, 65
L, 76, 74
L, 76, 75
L, 77, 75
L, 77, 78
L, 77, 88
L, 78, 67
L, 78, 77
L, 78, 80
L, 79, 80
L, 79, 81
L, 79, 89
L, 80, 69
L, 80, 78
L, 80, 79
L, 81, 1
L, 81, 79
L, 81, 82
L, 82, 71
L, 82, 81
L, 82, 83
L, 83, 3
L, 83, 82
L, 84, 73
L, 84, 86
L, 85, 86
L, 85, 87
L, 85, 90
L, 86, 75
L, 86, 84
L, 86, 85
L, 87, 4
L, 87, 85
L, 87, 88
L, 88, 77
L, 88, 87
L, 88, 89
L, 89, 6
L, 89, 79
L, 89, 88
L, 90, 13
L, 90, 85


Best Regards,

Davinder Saini
rhythm_saini is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] How to make elements not to belong to both domains dizzy ANSYS Meshing & Geometry 4 November 30, 2011 13:25
OpenFOAM 1.7.1 installation problem on OpenSUSE 11.3 flakid OpenFOAM Installation 16 December 28, 2010 08:48
2D Meshing - No matter how thin my model is, it is still 2 elements thick RossFS ANSYS Meshing & Geometry 6 April 14, 2010 00:13
make a chart in CFX-POST Alessandro CFX 1 March 4, 2008 16:24
[Q]How to make MPEGs with CFD datas??? Bum-Seok Hyun Main CFD Forum 4 February 16, 2000 18:59


All times are GMT -4. The time now is 05:09.