CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Combining CFD-Post Report Information (http://www.cfd-online.com/Forums/ansys/108085-combining-cfd-post-report-information.html)

fatirishman53 October 14, 2012 14:59

Combining CFD-Post Report Information
 
Background:

In my CFD class, we have been given an assignment to analyze the results of a backward step problem using different Reynold's numbers. I'm not sure if it was the most efficient means, but I created and completed an initial project in the workbench and duplicated the geometry and mesh. In the duplicate setups, I changed the inlet velocity to produce the proper Reynold's Number and produced reports with the same format and updated solution data.

What I am using: Ansys 13.0 student version

Problem:

What I am wanting to do is produce a combined report comparing streamlines from each solution. Is this possible, and if so how?

Thanks in advance.


All times are GMT -4. The time now is 08:37.