problem about:Creating dat file for airfoils
 

Hi everyone,

I want to create/find a dat file for SD7003 airfoil to directly insert in ansys design moduler. Could anybody help?

Best regards...

Sd7003-085-88
1.00000 0.00000
0.99681 0.00031
0.98745 0.00132
0.97235 0.00310
0.95193 0.00547
0.92639 0.00824
0.89600 0.01139
0.86112 0.01494
0.82224 0.01884
0.77985 0.02304
0.73449 0.02744
0.68673 0.03197
0.63717 0.03649
0.58641 0.04086
0.53499 0.04494
0.48350 0.04859
0.43249 0.05171
0.38250 0.05415
0.33405 0.05581
0.28760 0.05658
0.24358 0.05639
0.20240 0.05518
0.16442 0.05292
0.12993 0.04961
0.09921 0.04526
0.07244 0.03993
0.04978 0.03372
0.03130 0.02677
0.01702 0.01932
0.00697 0.01172
0.00127 0.00438
0.00025 -0.00186
0.00457 -0.00741
0.01408 -0.01285
0.02839 -0.01759
0.04763 -0.02141
0.07182 -0.02438
0.10073 -0.02660
0.13407 -0.02809
0.17150 -0.02888
0.21268 -0.02900
0.25719 -0.02852
0.30456 -0.02752
0.35426 -0.02608
0.40572 -0.02428
0.45837 -0.02217
0.51161 -0.01980
0.56484 -0.01723
0.61748 -0.01450
0.66898 -0.01167
0.71883 -0.00887
0.76644 -0.00628
0.81118 -0.00403
0.85241 -0.00220
0.88957 -0.00082
0.92210 0.00008
0.94952 0.00052
0.97134 0.00057
0.98718 0.00037
0.99679 0.00011
1.00000 0.00000

Thank you, however datas you gave is not working for ansys design modeler, i believe the format was not suitable for ansys i have found that data file for naca0012 which is perfectly works with ansys dm. And the format is the following ;

1 1 0.00000 0.00000 0.00000
1 2 0.00200 0.00778 0.00000
1 3 0.00400 0.01091 0.00000
1 4 0.00600 0.01328 0.00000
1 5 0.00800 0.01524 0.00000
1 6 0.01000 0.01696 0.00000

and it goes like this...

maybe i dont know how to input datas in the format that you give, if there is anyway to do could anyone explain?