CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Batch mode ICEM CFD parametrization problem (http://www.cfd-online.com/Forums/ansys/110753-batch-mode-icem-cfd-parametrization-problem.html)

sportsfun December 19, 2012 15:20

Batch mode ICEM CFD parametrization problem
 
Hi to everybody,

I'm tryin to run a parametrized computation through Ansys workbench 14.0 using the batch mode. I did it all the same as in the video under the following link:

http://www.ansys-blog.com/2012/10/04...d-interactive/

When I'm doing it through the interactive mode, everything's running smoothly and the mesh previously having been made in ICEM transports to workbench. When I change to the batch mode and generate the mesh again, it shows me this erro:

error writing file.\hex.uns:
error openin file.\hex.uns: permission deniederror opening file.\hex.uns:Permission deied while executing ...........

To mention that of course I've first changed the mesh to unstructured and then transported to workbench.

Does anyone know what the problem can be?

Thanks in advance,
Eugene


All times are GMT -4. The time now is 23:12.