CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS

Mesh Quality for Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 21, 2012, 06:54
Default Mesh Quality for Fluent
  #1
New Member
 
dhananjay
Join Date: Oct 2012
Posts: 5
Rep Power: 4
dhananjay is on a distinguished road
Hello,
Please tell me what is minimum input mesh quality(tetramesh) required for Fluent.
Thanks..
dhananjay is offline   Reply With Quote

Old   December 24, 2012, 23:05
Default
  #2
Member
 
arjun
Join Date: Oct 2011
Location: Tokyo, JAPAN
Posts: 66
Rep Power: 5
arjun3020 is on a distinguished road
0.3 must for fluent. if you are using CFX then it can handle low quality mesh.
but fluent cant.
1. minimun angle must be greater than 20 degree.
2. quality 0.3
arjun3020 is offline   Reply With Quote

Old   December 24, 2012, 23:43
Default
  #3
New Member
 
dhananjay
Join Date: Oct 2012
Posts: 5
Rep Power: 4
dhananjay is on a distinguished road
Thank u arjun3020 for reply.
i'm beginer to fluent.
u said mesh quality of 0.3.
can u plz tell me is it orthogonal quality?
i am modelling for Ac louvers of the car
dhananjay is offline   Reply With Quote

Old   December 27, 2012, 03:34
Default CFX-post
  #4
New Member
 
Mohammed
Join Date: Oct 2012
Posts: 27
Rep Power: 4
mohw2002 is on a distinguished road
Hello,
I have half pipe with one perforation on the top of the wall and another one without perforation. I draw them by ICEM-CFD and mesh (tetra) for the two cases. My problem when I want to draw the wall shear, pressure drop at polyline that coming from intersection method. When I want to draw the results by chart, the curve is coming like zeg-zag not straight. Why?
Thanking you in anticipation
mohw2002 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
No layers in a small gap bobburnquist OpenFOAM Native Meshers: snappyHexMesh and Others 2 November 25, 2012 09:54
Polyhedral Mesh Quality in Star-CCM+ niazaliahmed STAR-CCM+ 3 March 8, 2012 14:51
[ICEM] Tetra mesh quality before and after prism layer Chander ANSYS Meshing & Geometry 0 December 25, 2011 23:04
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10


All times are GMT -4. The time now is 20:42.