CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Multiple layer wall

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 16, 2013, 23:35
Question Multiple layer wall
  #1
New Member
 
Tiago Morgado
Join Date: Dec 2012
Posts: 8
Rep Power: 13
TMorgado is on a distinguished road
I modeled a furnace ( fluid cell zone ) and I want to simulate the transient heat transfer on its walls. This walls have 2 layers of different material with different thickness.
How can I model something like that? Do I have to create this walls and generate its mesh?

Note: Thickness is much smaller than length and width of the wall.

Thanks in advance
TMorgado is offline   Reply With Quote

Reply

Tags
furnace, thickness, wall boundary condition

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Enhanced Wall Treatment paduchev FLUENT 24 January 8, 2018 12:55
[snappyHexMesh] Layers:problem with curvature giulio.topazio OpenFOAM Meshing & Mesh Conversion 10 August 22, 2012 10:03
[snappyHexMesh] Layers don't fully surround surface EVBUCF OpenFOAM Meshing & Mesh Conversion 14 August 20, 2012 05:31
[ICEM] Export ICEM mesh to Gambit / Fluent romekr ANSYS Meshing & Geometry 1 November 26, 2011 13:11
errors Fahad Main CFD Forum 0 March 23, 2004 14:20


All times are GMT -4. The time now is 08:29.