CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   ANSYS/DNS question (http://www.cfd-online.com/Forums/ansys/112692-ansys-dns-question.html)

Stratos February 3, 2013 00:32

ANSYS/DNS question
 
Hi everyone,

I am pretty new to CFD and am using ANSYS CFX for my simulations. I am wondering if ANSYS CFX uses direct numerical simulation in all of it's calculations or how it is possible to know what type of calculations it is doing.

Sorry for the basic questions, any help is appreciated.

jdrch February 3, 2013 21:07

Per an ANSYS engineer at their Automotive Simulation World Conference last year, no ANSYS product currently supports DNS.

flotus1 February 6, 2013 07:16

As far as i know, switching off the turbulence modeling ("laminar") results in a DNS. This is possible with the ansys products I know.

This partly covers the initial question. The type of turbulence model you are using determines which equations are solved.


All times are GMT -4. The time now is 22:54.