CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   porous-jump cannot be used in Eulerian multiphase flow? (http://www.cfd-online.com/Forums/ansys/112785-porous-jump-cannot-used-eulerian-multiphase-flow.html)

blacksoil2012 February 5, 2013 11:43

porous-jump cannot be used in Eulerian multiphase flow?
 
tested: Ansys 14.0 and 14.5

I'm setting up an internal face as porous-jump, and then when I choose the Eulerian multiphase model, it says "Warning: The porous-jump zone type is not valid with currently enabled models. Change zone type or enable appropriate models before proceeding".

If I tried to use VOF or mixture model, then it will be OK.

I'm wondering why is this incompatibility? Thanks~


All times are GMT -4. The time now is 23:52.