[fesat181]

Hi Everybody,
I researched a lot of forums to solve this problem. But they don't help me.
Ansys licences are works very well. Workbench is opened normally.
But if I want to start to geometry editor. Opss error: Ansyswbu.exe encountered a problem. I can not open the mechanical editor.

I tried below before installation;
-diasble antivirus
-Vga card update
-disable firewall
-delete old versions
-add "a system environment" ANS_OLD_ATTACH=1

I did not manage to solve it.
Please help

System: win7 64bit

[wcmansp]

We had the same situation (same symptoms, same attempts to remedy) and found that by doing a repair reinstall of Windows 7 (it rolls the Windows 7 files back to their original versions but keeps all your program info and data intact) the summary that displayed when it finished identified some core Windows files that had been changed, files that were associated with our VPN software client. It replaced these files and ANSYS then worked. This may not solve the issue for you but, as you found (and we also found), there aren't a lot of solutions for this particular problem; this approach may reveal a problem and has the advantage of being simple to try and non-destructive.

There's a useful summary of the possible Windows 7 repair reinstall options here:

http://www.sevenforums.com/tutorials...r-install.html

Good luck.

[hooshies]

I am having the same problem as fesat181. I have tried uninstalling/reinstalling ANSYS 14 and 14.5 to get rid of the problem, to no avail.

I have tried the following typically recommended fixes:

• ATI A.I. and 3D settings
• ANS_OLD_ATTACH = 1
• Disable firewall
• Renaming ANSYS folders in %temp% and %AppData%

Anyone have any suggestions other than a Win7 reinstall?

I'm running Win7 64-bit