CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Mach Number in CFD-Post (http://www.cfd-online.com/Forums/ansys/116486-mach-number-cfd-post.html)

valio April 20, 2013 05:51

Mach Number in CFD-Post
 
Hi everyone,

I work on modeling of supersonic flows and I analyse the results with CFD-Post.
(I work with a density based solver and ideal gas.)

Someone knows why I can not find mach number in the proposed list of contour?

Thanks
Valio

dklastiwka April 20, 2013 10:09

Can you send me you files? I can take a look and see.

dklastiwka April 23, 2013 10:14

Open your file in Fluent (both cas and dat files). Then go file>export to CFD-post (you will need to set the reference pressure to something other than 0). Pick the variable you want to export and type in a file name. Open this new file in CFD-post and you should have all the variables you picked available in CFD-post including Mach number.


All times are GMT -4. The time now is 00:23.