CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS

Exporting results water level AQWA and how to model 1 degr. of freedom?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 10, 2013, 05:53
Default Exporting results water level AQWA
  #1
New Member
 
Cees Biesheuvel
Join Date: Jun 2013
Posts: 1
Rep Power: 0
ceesbiesheuvel is on a distinguished road
Hi all,

I try to model a floating breakwater as a floating structure (pontoon shape) in ANSYS (14.0), AQWA. I am mostly interested in the motion of the structure and at the surface elevation (wave heights) at the lee-side of the floating structure.

Question:
When I run the model with a fixed structure (no movements) or with 6 degrees of freedom the wave heights at the lee-side are satisfactory. But how do I extract the surface elevation elevation from the program? I would like to know for each grid cell what the surface elevation is.

Thanks!

Last edited by ceesbiesheuvel; June 10, 2013 at 07:27.
ceesbiesheuvel is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 04:27.