CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Save geometry as STL from ICEM CFD (http://www.cfd-online.com/Forums/ansys/123357-save-geometry-stl-icem-cfd.html)

summerdream September 10, 2013 16:32

Save geometry as STL from ICEM CFD
 
Hi, I am wondering if there is a way to save geometry as STL file in ICEM CFD. Save geometries under File can only save as .tin or .tin.gz.

Thanks.


All times are GMT -4. The time now is 06:49.