CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Transfer of Expressions from CFX to Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 1, 2013, 10:12
Default Transfer of Expressions from CFX to Fluent
  #1
New Member
 
Rich
Join Date: Sep 2013
Posts: 3
Rep Power: 12
WK912 is on a distinguished road
Hello everyone, and I hope that this is the correct place to put this post!

Recently I have started an internship at a very large company, who have decided that they want a simulation that was originally run in CFX transferred to Fluent, in order to use Fluent's Ffowcs-Williams- Hawkings capabilities. In the CFX simulation, there are a number of User Defined Expressions involving surface integrals and other mathematics more complicated than simple algebra. There is also a few user defined variables that i need to transfer over.

I have worked in very limited capacity with Fluent before, and I know that i'm going to have to use the "UDF" functionality for this, programming in C (which i have never done before), but it seems that this will be very difficult to do, considering that the mathematical capabilities of the CEL are much more user friendly! I suppose I am coming here to ask if I am approaching this problem wrong, asking for any advice you could give, or any resources that i have not been made aware of. I would love to read through the entire Users Manual and the UDF guide, but that's over 3000 pages! Is there a simpler way to go about transferring these expressions? Or even a simple way of doing some sort of noise simulations in CFX?

Any help is really, really, appreciated. Not sure why they put me on this task, but I'd like to learn to do it if I can! Thanks!
WK912 is offline   Reply With Quote

Reply

Tags
cfx, expressions, fluent, noise analysis, transfer

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
heat transfer with RANS wall function, over a flat plate (validation with fluent) bruce OpenFOAM Running, Solving & CFD 6 January 20, 2017 07:22
Uploading CFX transient files(.trn) in to Fluent subba CFX 4 July 11, 2013 05:19
Different result in CFX and fluent for mass trans.? is segregated better? ftab CFX 7 September 27, 2012 08:57
solving ocean wave with Fluent or CFX? gholamghar Main CFD Forum 1 March 21, 2009 13:49
Fluent and CFX Ale Main CFD Forum 7 July 30, 2008 22:14


All times are GMT -4. The time now is 23:54.