CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Export parameter from ANSYS Workbench into a Log-file (http://www.cfd-online.com/Forums/ansys/126746-export-parameter-ansys-workbench-into-log-file.html)

xtphgu November 25, 2013 11:09

Export parameter from ANSYS Workbench into a Log-file
 
Hi everyone,

i try to run a optimization Program with Ansys Workbench. Therefore I need a way to set and get Workbench parameters only using CMD commands. Using a script to starting Ansys via CMD in batch mode to set parameters and start the simulation works fine so far.
But my problem is: How can i get the results from my CFX simulation (Workbench Parameters) in a file. Is it possible to write a log file with all changed parameters?

Best Regards

xtphgu November 26, 2013 17:24

To get the scripting code you can simply record a script. For export data in an *.csf file you have to activate beta functions (ANSYS 14.5.7) then ride click at the parameters and you see "export to csv" now.


All times are GMT -4. The time now is 23:47.