CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   geometry (http://www.cfd-online.com/Forums/ansys/127308-geometry.html)

hussain_2723 December 8, 2013 18:13

geometry
 
Can any one tell me how to fix the following problem in a gemetry after slicing has been done in DM
#the holes apears that causes problems in the meshing although the slivers has been removed


All times are GMT -4. The time now is 10:38.