geometry -- CFD Online Discussion Forums

December 8, 2013, 17:13	geometry	#1
hussain_2723 New Member muhammad hussain Join Date: Nov 2013 Location: pakistan Posts: 5 Rep Power: 12	Can any one tell me how to fix the following problem in a gemetry after slicing has been done in DM #the holes apears that causes problems in the meshing although the slivers has been removed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about Geometry vs. Meshes	EphemeralMemory	ANSYS Meshing & Geometry	2	December 8, 2016 13:02
[ANSYS Meshing] need to convert a cell based geometry into STL or CGNS	kamran_kibria	ANSYS Meshing & Geometry	0	September 15, 2011 05:14
Reg difficulties in meshing the geometry...Urgent	arunraj	ANSYS Meshing & Geometry	0	August 26, 2011 23:25
[snappyHexMesh] SnappyHexMesh meshes inside and outside of an STL geometry	villier	OpenFOAM Meshing & Mesh Conversion	17	June 15, 2010 19:51
[GAMBIT] import terrain geometry	cfdworker	ANSYS Meshing & Geometry	2	May 24, 2009 21:40

All times are GMT -4. The time now is 08:09.