|January 7, 2014, 03:06||
Left-handed face warning for a 3D grid
Join Date: Oct 2012
Posts: 2Rep Power: 0
I am trying to simulate a flow through a cylinder. I generated a 3D grid using ICEM-CFD and imported it to FLUENT 13.0. The grid comprises of two parts: a circular inlet with a swirler, and a cylinder. I am defining the walls on both the geometries as interface and then attaching them using the mesh interface tool in FLUENT. After doing so, I perform mesh check and get following warning:
WARNING: left-handed faces detected on zone 14: 1009810 right-handed, 954 left-handed.
WARNING: left-handed faces detected on zone 20: 22377 right-handed, 19 left-handed.
WARNING: left-handed faces detected on zone 11: 1320 right-handed, 1 left-handed.
WARNING: left-handed faces detected on zone 3: 160 right-handed, 2 left-handed.
WARNING: left-handed faces detected on zone 12: 14666 right-handed, 31 left-handed...
Zone 19: 5 cell(s) might not be closed, e.g. a face is missing (on 0)........................
WARNING: Mesh check failed.
I did all the things suggested on this forum using TUI commands but this error still persists. If anyone has come across such error and has suggestions to overcome it, I'll be very grateful!
|fluent, left-handed faces, mesh check failed|
|Thread||Thread Starter||Forum||Replies||Last Post|
|How to define to right point for locationInMesh||Mirage12||OpenFOAM Native Meshers: snappyHexMesh and Others||4||April 10, 2014 10:12|
|Error message: 8 face(s) not in face lists of adjacent cells||jyoung79||FLUENT||0||November 10, 2012 17:09|
|Import netgen mesh to OpenFOAM||hsieh||Open Source Meshers: Gmsh, Netgen, CGNS, ...||32||September 13, 2011 05:50|
|blockMesh error ...||balkrishna||OpenFOAM Pre-Processing||0||August 17, 2010 02:39|
|Axisymmetrical mesh||Rasmus Gjesing (Gjesing)||OpenFOAM Native Meshers: blockMesh||10||April 2, 2007 14:00|