CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

How to solve in ANSYS V12.1 model information problem.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 22, 2014, 18:36
Default How to solve in ANSYS V12.1 model information problem.
  #1
New Member
 
Join Date: Jan 2013
Posts: 6
Rep Power: 13
Ilker is on a distinguished road
Hi all,

I drew in ANSYS V12.1 a simple geometry. I completed drawing and then I made the mesh. While I was making the mesh I created five different regions (boundaries) and named these regions respectively. I completed making the mesh and then while I opened the "Setup" section I met "The model information is not compatible with the mesh" failure. I attached the the file to clearify and to identify the problew which I met when I opened the Setup section in ANSYS V12.1.

Does anybody has any information to solve "the model information is not compatible with the mesh" problem? I will be very pleasure for your helps.

Thanks for your attention and for your helps.

Attached Images
File Type: jpg Modelinformationfileisnotcompatiblewithmesh_failure.jpg (101.0 KB, 1 views)

Last edited by Ilker; March 22, 2014 at 21:29.
Ilker is offline   Reply With Quote

Old   March 22, 2014, 21:32
Default
  #2
New Member
 
Join Date: Jan 2013
Posts: 6
Rep Power: 13
Ilker is on a distinguished road
I have investigated for a long time to solve this problem. If anybody has any idea how to solve or fix this proble would anybody like to share?

Thanks a lot for your attention.
Ilker is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pro/E to ANSYS Parameterization Guide Trues ANSYS 4 April 18, 2018 06:52
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
How to use non-equilibrium thermal model for porous medium in Ansys CFX 13.0? Chander CFX 3 November 28, 2011 15:26
Problem in Buoyancy Model? dhrubo CFX 3 June 5, 2010 06:32
extremely simple problem... can you solve it properly? Mikhail Main CFD Forum 40 September 9, 1999 10:11


All times are GMT -4. The time now is 03:15.