CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

cell zone creation in 2d mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 7, 2014, 13:09
Default cell zone creation in 2d mesh
  #1
New Member
 
arrmando
Join Date: May 2014
Posts: 16
Rep Power: 11
aarratia is on a distinguished road
Hi guys,
I am trying to create 3 cell zones in my 2d mesh. But I can seem to find how. I am using DM (design modeler) and fluent mesh. Can you please help me!! My mesh is really just a simple rectangle but I would like to separate 3 phases inside it. I have attached an image from dam break tutorial so you can get the idea of what I am trying to accomplish.

AA
Attached Images
File Type: jpg cellzones.jpg (43.4 KB, 15 views)
aarratia is offline   Reply With Quote

Old   May 7, 2014, 18:03
Default cell zones defined but now my boundary conditions are not working properly
  #2
New Member
 
arrmando
Join Date: May 2014
Posts: 16
Rep Power: 11
aarratia is on a distinguished road
Hi guys,
I managed to make cell zones by going in the design modeler and using surface split to create my 3 zones within the same surface. Then in the Workbench Mesh program I go and name the 3 regions as well as my boundary walls. My problem now is that when I go from the mesh program into Fluent, the defined boundaries (named selections) from the mesh are not carried. Why is this? I get an error "One or more Named Selections have no mesh associated with them. Either the CutCell meshing failed due to tessellation problems or the size of a Named Selection is smaller than the min. size.". I have remeshed to different sizes with no luck.
Any ideas?

AA
aarratia is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 10:38
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
[GAMBIT] Problem with interior faces miro2000 ANSYS Meshing & Geometry 11 August 24, 2013 15:00
[ICEM] Export ICEM mesh to Gambit / Fluent romekr ANSYS Meshing & Geometry 1 November 26, 2011 13:11
Warning 097- AB Siemens 6 November 15, 2004 05:41


All times are GMT -4. The time now is 12:50.