|
[Sponsors] |
October 4, 2014, 05:37 |
tetra/prism mesh with ICEM
|
#1 |
New Member
Join Date: Sep 2014
Posts: 5
Rep Power: 11 |
Hi
I'm trying to create a tetra/prism mesh around a submarine. Before creating the prism layers, the quality of tetra mesh is high (minimum orthogonal quality higher than 0.3) but after creating prism layer, quality goes down and when I check quality in Fluent, minimum orthogonal quality becomes less than 0.1. Can anybody help me in this case? thanks |
|
October 7, 2014, 09:04 |
|
#2 |
New Member
Ben Gafner
Join Date: Aug 2014
Posts: 1
Rep Power: 0 |
What are the parameters of the prism layer that you have used?
Have you also selected the prism layers with the worse quality to see if there is an issue with overall growth height and geometry dimensions? Could you include a cut plane to give us a better idea, or an iso view with the lower quality prism elements? |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 04:19 |
[ANSYS Meshing] Question about ICEM mesh output to CFX | lnk | ANSYS Meshing & Geometry | 0 | July 27, 2012 16:39 |
ICEM Edit Mesh | blackbody | ANSYS Meshing & Geometry | 3 | March 8, 2010 03:49 |
Boddy fitted Hexcore Mesh in ICEM Cfd | Mitch | CFX | 0 | December 29, 2008 07:07 |
ICEM clustering of mesh points and multiple edges | webhaw | CFX | 4 | July 25, 2007 17:29 |