CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS

Interest in modeling a deformable bag sitting on a rocking table

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 4, 2014, 14:43
Default Interest in modeling a deformable bag sitting on a rocking table
  #1
Member
 
Matthew Rich
Join Date: Jul 2013
Posts: 33
Rep Power: 5
FreeFall79 is on a distinguished road
Hi all

I am interested in examining the sloshing around of liquid in a bag sitting on a rocking table to model single use technology. I wanted to try to capture how the bag shape deforms as the water is sloshed. I think this could be accomplished with a deform-able mesh and maybe some clever constraints. Fishing for suggestions to get me started.

I was leaning towards doing this problem in FLUENT but if CFX is better I will go that route.

Thanks in advance.

Last edited by FreeFall79; November 4, 2014 at 14:45. Reason: clarity
FreeFall79 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
9th International OpenFOAMŪ Workshop, 23-26 June 2014 in Zagreb, Croatia. dominik_christ OpenFOAM Announcements from Other Sources 7 August 7, 2014 10:29
Deforming wall problem alxasli FLUENT 3 January 10, 2011 07:22
Modeling Flow/Saturation/Absorption in Fibers Gene Dougherty Main CFD Forum 0 June 6, 2003 14:49
CFD Modeling of Two-phase Flow in Small Dia.Tubes Eric Poindexter Main CFD Forum 2 September 22, 2000 09:21


All times are GMT -4. The time now is 13:24.