CFD Simulation of Exhaust Gas Dispersion into Atmosphere from Industrial Stack

Mehul Patel · January 23, 2015, 07:36

The objective of CFD simulation of exhaust gases emitting from industrial stack, for investigation of SO2 dispersion into atmosphere.

Solution:

Exhaust gas analysis was performed to investigate the SO2 dispersion in the atmosphere from the industrial stack. A wind profile was developed using UDF (User Defined Functions) to replicate actual atmospheric conditions. The simulation results showed the dispersion of the SO2 along with other species in to the atmosphere within the 500m radius from the stack.

Full Case Study at:
CFD Simulation of Exhaust Gas Dispersion into Atmosphere from Industrial Stack

AnuGupta · February 22, 2017, 00:34

HI,

I have seen your post on gas dispersion from an industrial stack, I really impressed with the study which you have performed. I would like to perform similar study as a part of my Ph.D work but with pollutants from the industrial stack. It would be great if you could help me in setting up the experiment in OpenFOAM.

Thank you.

With Regrads.

Kummi · March 12, 2018, 02:11

Hello Mehul Patel,

Hope you are doing good..
Currently my project is same with respect to your topic. Could you please help me with my query posted in link below.

Flare Gas Dispersion into Atmosphere from Industrial Stack with effects of radiation

Thank you

January 23, 2015, 07:36	CFD Simulation of Exhaust Gas Dispersion into Atmosphere from Industrial Stack	#1
Mehul Patel Member Mehul Patel - CFD Expert Join Date: Jul 2013 Location: Ahmedabad Posts: 41 Rep Power: 12	The objective of CFD simulation of exhaust gases emitting from industrial stack, for investigation of SO2 dispersion into atmosphere. Solution: Exhaust gas analysis was performed to investigate the SO2 dispersion in the atmosphere from the industrial stack. A wind profile was developed using UDF (User Defined Functions) to replicate actual atmospheric conditions. The simulation results showed the dispersion of the SO2 along with other species in to the atmosphere within the 500m radius from the stack. Full Case Study at: CFD Simulation of Exhaust Gas Dispersion into Atmosphere from Industrial Stack Kummi likes this. __________________ Thanks, HiTech CFD - CFD Analysis Services Provider. http://www.hitechcfd.com/

February 22, 2017, 00:34	Your guidance to simulate same by using OpenFOAM	#2
AnuGupta New Member Anu Gupta Join Date: Feb 2017 Posts: 1 Rep Power: 0	HI, I have seen your post on gas dispersion from an industrial stack, I really impressed with the study which you have performed. I would like to perform similar study as a part of my Ph.D work but with pollutants from the industrial stack. It would be great if you could help me in setting up the experiment in OpenFOAM. Thank you. With Regrads.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boundary conditions for gas dispersion case	DarrenC	FLUENT	0	April 10, 2014 05:26
Ideal gas v.s. Real gas for wing simulation	Anna Tian	Main CFD Forum	1	December 16, 2013 11:39
Gas dispersion in air error message	redhoax	OpenFOAM Running, Solving & CFD	27	October 25, 2013 05:31
Gas plume or flare simulation	ahourri	FLUENT	0	November 14, 2005 09:23
Reactor simulation using CFD takes to the Internet	Mark Brennan	Main CFD Forum	0	April 16, 1999 05:57

March 12, 2018, 02:11		#3
Kummi Senior Member Kumaresh Join Date: Oct 2016 Posts: 347 Rep Power: 11	Hello Mehul Patel, Hope you are doing good.. Currently my project is same with respect to your topic. Could you please help me with my query posted in link below. Flare Gas Dispersion into Atmosphere from Industrial Stack with effects of radiation Thank you