CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Turbulent Model Problem (http://www.cfd-online.com/Forums/ansys/67039-turbulent-model-problem.html)

yeeking86 July 31, 2009 21:03

Turbulent Model Problem
 
I am running simulation on micro-scale model. The Re is really low (bout 50) so which turbulent model should I be using? Or should I just use None?

Thank you

timjm September 30, 2009 10:40

When I was simulating microfluidic devices at low reynolds numbers I just left the turbulent model off.

Only put it on if you forsee having turbulent flow i.e. high reynolds numbers.


All times are GMT -4. The time now is 07:09.