CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Catia to Gambit (http://www.cfd-online.com/Forums/ansys/71543-catia-gambit.html)

sbajpai January 6, 2010 22:18

Catia to Gambit
 
5 Attachment(s)
Thanks to everyone who helped with my previous issue.

Great news I have some Progress about 30 %.

My Project is CFX Simulationof a Flu Virus SPread in a Flight Cabin.

1) I think I have been Successfully been able to construct a Model in Catia V5 R19 that will work in Gambit.

2) I have uploaded my Model Here in Rapidshare, This site ha s alimit of 100KB Where my CatPart is around 600KB.

(This Model is not to scale, As i am not familiar to catia so i decided to make a rough one and see if i am in the Right direction.) I used The Boolean Add Feature to Join Separate Bodies Together into one Single PartBody.

http://rapidshare.com/files/33125038...n.CATPart.html
(There are holes on ceiling, 9 of them in total, which correspond to 9 inlets of AirCon for 9 Seats)

I dont have access to Gambit, If anyone could check my Model and give me there input that weather I am on the right Track.

I honestly have no idea, Any feedback is welcome.


All times are GMT -4. The time now is 02:53.