CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Marine Impeller Geometry (http://www.cfd-online.com/Forums/ansys/76930-marine-impeller-geometry.html)

fcabrales June 8, 2010 16:20

Marine Impeller Geometry
 
Hello CFD Community!

I have to simulate a mixng tank equipped eith a marine impeller.

Does anyone of you have a marine impeller geometry (3D CAD for example)or any tutorial to draw it using ANSYS.

I will really appreciate your help.

Fredy

losdomanos June 11, 2010 13:27

I was working on that impeller geometry. If you PM me I could send you what i get. It's not perfect but it's always something, And you could get an idea of creating such type of geometry.

maryam July 4, 2010 11:38

Mixing tank
 
Hello,
please help me,
I want to simulate mixing tank by fluent. I define rotating blade as solid, the simulation is 3D, 2 phases without reaction.I want to optimize mixer velocity.
the problem is: fluent can not recognize the solid zone and consider water and sand inside of mixer and impeller instead of mixing tank.
please help me
thanks


All times are GMT -4. The time now is 20:25.