CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Help -problem with meshing (http://www.cfd-online.com/Forums/ansys/77099-help-problem-meshing.html)

marbro June 13, 2010 06:41

Help -problem with meshing
 
I have problem with meshing. I done a figure in ansys (here I put screen from inventor the figure is the same as see).
http://i292.photobucket.com/albums/m...1312-15-49.jpg
I define properties of the material, next element type (8 node 185). From Ansys I selected MEshTool and I try to mesh volume (screen below, blue marks I choose options):
http://i292.photobucket.com/albums/m...ossx/Sweep.jpg
I gained next step and warning:
http://i292.photobucket.com/albums/m...sx/warning.jpg

How to solve this problem which options I must change to mesh a figure.

Thank for help


All times are GMT -4. The time now is 00:57.