- **ANSYS**
(*http://www.cfd-online.com/Forums/ansys/*)

- - **problem in apdl**
(*http://www.cfd-online.com/Forums/ansys/77333-problem-apdl.html*)

problem in apdlI have created a block in 3D and I have tried to display the mesh information in separate files.
First, I have got the elements number with their rnodes number. Second, I have got the nodes number with their locations x y and z. But, I can't find how to get the face number with their corresponding nodes for a specified boundary.(area) please any help here is the apdl program /PREP7 !* ET,1,FLUID142 !* BLOCK,-3,12,-3,3,0,3, /VIEW,1,1,2,3 /ANG,1 /REP,FAST MSHAPE,0,3D MSHKEY,1 !* CM,_Y,VOLU VSEL, , , , 1 CM,_Y1,VOLU CHKMSH,'VOLU' CMSEL,S,_Y !* VMESH,_Y1 !* CMDELE,_Y CMDELE,_Y1 CMDELE,_Y2 !* *CFOPEN,test1,cell *GET,NE,ELEM,0,COUNT UNI=1 *DO,I,1,NE *get,NE1,ELEM,I,node,1 *get,NE2,ELEM,I,node,2 *get,NE3,ELEM,I,node,3 *get,NE4,ELEM,I,node,4 *get,NE5,ELEM,I,node,5 *get,NE6,ELEM,I,node,6 *get,NE7,ELEM,I,node,7 *get,NE8,ELEM,I,node,8 *vwrite,I,NE1,NE2,NE3,NE4,NE5,NE6,NE7,NE8,UNI,UNI (I8,2x,E10.4,2x,E10.4,2x,E10.4,2x,E10.4,2x,E10.4,2 x,E10.4,2x,E10.4,2x,E10.4,2x,I1,2x,I1) *ENDDO *CFCLOS *CFOPEN,Test2,vrt *GET,NN,NODE,0,COUNT *DO,I,1,NN *get,xnode,node,I,loc,x *get,ynode,node,I,loc,y *get,znode,node,I,loc,z *vwrite,I,xnode,ynode,znode (I8,2x,E20.9,3x,E20.9,3X,E20.9) *ENDDO *CFCLOS FINISH |

All times are GMT -4. The time now is 05:26. |