CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   fluent warning (http://www.cfd-online.com/Forums/ansys/77619-fluent-warning.html)

ringtail June 29, 2010 05:51

fluent warning
 
Dear all, I am getting the following warning while I import the mesh into FLUENT 12.1. The mesh is generated by ICEM CFD v12.1, and it is 2D.

Warning information:

130106 nodes.
129291 quadrilateral cells, zone 10.
257765 2D interior faces, zone 11.
155 2D wall faces, zone 12.
577 2D wall faces, zone 13.
196 2D wall faces, zone 14.
706 2D pressure-far-field faces, zone 15.

Building...
mesh
materials,
interface,
domains,
zones,
outer
flap
main
slat
int_solid
solid
Warning: Flow boundary zone 15 is adjacent to a solid
zone (10). This problem MUST be fixed before
solution can proceed!

Done.

Preparing mesh for display...
Done.

What should I do? Any one can help me?
thank you.

Geisel June 29, 2010 10:09

Change solid into fluid

ringtail June 29, 2010 11:16

Quote:

Originally Posted by Geisel (Post 264974)
Change solid into fluid

I have solved it. you are right.
thanks.

tejas.khetani September 2, 2010 20:59

Hey Ringtell,
Can you tell me where I am suppose to change Solid into Fluid???
I am asking as I am facing same problem as yours which says
Warning: Flow boundary zone 5 is adjacent to a solid
zone (2). This problem MUST be fixed before
solution can proceed!

ringtail September 2, 2010 22:16

Quote:

Originally Posted by tejas.khetani (Post 273812)
Hey Ringtell,
Can you tell me where I am suppose to change Solid into Fluid???
I am asking as I am facing same problem as yours which says
Warning: Flow boundary zone 5 is adjacent to a solid
zone (2). This problem MUST be fixed before
solution can proceed!

Problem setup --> cell zone conditions --> change the zone type of computation domain to fluid.

tejas.khetani September 2, 2010 22:56

Thanks Man...It worked...:) :)

sandycbe December 4, 2011 18:13

fluent warning
 
I am using fluent 6.3.26.. I am also getting the error Warning: Flow boundary zone 5 is adjacent to a solid
zone (2). This problem MUST be fixed before
solution can proceed!

Can anybody help me in this...
Thanks in advance...

tejas.khetani December 4, 2011 18:24

sandycbe
 
please try this one,....

Problem setup --> cell zone conditions --> change the zone type of computation domain to fluid.

sandycbe December 4, 2011 18:33

but i cant find the problem setup option in fluent 6.3.26...
i dont know how to do that... can you help me in this...

tejas.khetani December 4, 2011 22:06

sandycbe
 
1 Attachment(s)
Hey this attachments might help you.

sandycbe December 5, 2011 00:48

thank you tejas.khetani....

MetalSupremacist April 23, 2012 15:54

Quote:

Originally Posted by Geisel (Post 264974)
Change solid into fluid

This seems to be a simple solution. But what if the solid zone is actually suppose to be solid?


All times are GMT -4. The time now is 06:56.