fluent warning

ringtail · June 29, 2010, 05:51

Dear all, I am getting the following warning while I import the mesh into FLUENT 12.1. The mesh is generated by ICEM CFD v12.1, and it is 2D.

Warning information:

130106 nodes.
129291 quadrilateral cells, zone 10.
257765 2D interior faces, zone 11.
155 2D wall faces, zone 12.
577 2D wall faces, zone 13.
196 2D wall faces, zone 14.
706 2D pressure-far-field faces, zone 15.

Building...
mesh
materials,
interface,
domains,
zones,
outer
flap
main
slat
int_solid
solid
Warning: Flow boundary zone 15 is adjacent to a solid
zone (10). This problem MUST be fixed before
solution can proceed!

Done.

Preparing mesh for display...
Done.

What should I do? Any one can help me?
thank you.

Geisel · June 29, 2010, 10:09

Change solid into fluid

ringtail · June 29, 2010, 11:16

Quote:

Originally Posted by Geisel

Change solid into fluid

I have solved it. you are right.
thanks.

tejas.khetani · September 2, 2010, 20:59

Hey Ringtell,
Can you tell me where I am suppose to change Solid into Fluid???
I am asking as I am facing same problem as yours which says
Warning: Flow boundary zone 5 is adjacent to a solid
zone (2). This problem MUST be fixed before
solution can proceed!

ringtail · September 2, 2010, 22:16

Quote:

Originally Posted by tejas.khetani

Hey Ringtell,
Can you tell me where I am suppose to change Solid into Fluid???
I am asking as I am facing same problem as yours which says
Warning: Flow boundary zone 5 is adjacent to a solid
zone (2). This problem MUST be fixed before
solution can proceed!

Problem setup --> cell zone conditions --> change the zone type of computation domain to fluid.

tejas.khetani · September 2, 2010, 22:56

Thanks Man...It worked...

sandycbe · December 4, 2011, 17:13

I am using fluent 6.3.26.. I am also getting the error Warning: Flow boundary zone 5 is adjacent to a solid
zone (2). This problem MUST be fixed before
solution can proceed!

Can anybody help me in this...
Thanks in advance...

tejas.khetani · December 4, 2011, 17:24

please try this one,....

Problem setup --> cell zone conditions --> change the zone type of computation domain to fluid.

sandycbe · December 4, 2011, 17:33

but i cant find the problem setup option in fluent 6.3.26...
i dont know how to do that... can you help me in this...

tejas.khetani · December 4, 2011, 21:06

Hey this attachments might help you.

sandycbe · December 4, 2011, 23:48

thank you tejas.khetani....

MetalSupremacist · April 23, 2012, 15:54

Quote:

Originally Posted by Geisel

Change solid into fluid

This seems to be a simple solution. But what if the solid zone is actually suppose to be solid?

f.kh · December 25, 2016, 14:37

Quote:

Originally Posted by MetalSupremacist

This seems to be a simple solution. But what if the solid zone is actually suppose to be solid?

Hi,
sorry did you get the answer?
the solid zone of my computation is actually solid (Aluminum), so it is not logical to change it to a fluid zone, so what's the solution?

regards,
Fahimeh

solanki004 · July 24, 2017, 21:52

Quote:

Originally Posted by f.kh

Hi,
sorry did you get the answer?
the solid zone of my computation is actually solid (Aluminum), so it is not logical to change it to a fluid zone, so what's the solution?

regards,
Fahimeh

Did you solve the problem??

Thanks and regards,
Ajay

solanki004 · July 24, 2017, 21:53

Quote:

Originally Posted by f.kh

Hi,
sorry did you get the answer?
the solid zone of my computation is actually solid (Aluminum), so it is not logical to change it to a fluid zone, so what's the solution?

regards,
Fahimeh

Did you get an answer??

regard,
Ajay.

Asjad · February 27, 2018, 09:10

has anyone able to solve this problem? I am still getting this error

han203 · May 26, 2019, 04:44

Quote:

Originally Posted by MetalSupremacist

This seems to be a simple solution. But what if the solid zone is actually suppose to be solid?

The problem happened in the meshing process. Because you don't choose the right face as a boundary. If your model contains 3 bodies, and you have to choose and name a face in one of the bodies, you'd better hide the other two bodies so that you don't choose the wrong face. The flow boundary id is the wrong face you chose. Go back to your meshing software and rechoose the face, then there would be no problem.

Debdoot_X · April 8, 2020, 17:36

It worked!!

Vignesh5710 · July 15, 2020, 11:58

Quote:

Originally Posted by tejas.khetani

Hey this attachments might help you.

Hope this give better clarity!

Puteri Farah Taslin · August 8, 2020, 11:02

hi. i cannot find the problem setup in my fluent. mine if 18.1.0 version. please help. thanks!

June 29, 2010, 05:51	fluent warning	#1
ringtail Member Join Date: Dec 2009 Location: China Posts: 79 Rep Power: 16	Dear all, I am getting the following warning while I import the mesh into FLUENT 12.1. The mesh is generated by ICEM CFD v12.1, and it is 2D. Warning information: 130106 nodes. 129291 quadrilateral cells, zone 10. 257765 2D interior faces, zone 11. 155 2D wall faces, zone 12. 577 2D wall faces, zone 13. 196 2D wall faces, zone 14. 706 2D pressure-far-field faces, zone 15. Building... mesh materials, interface, domains, zones, outer flap main slat int_solid solid Warning: Flow boundary zone 15 is adjacent to a solid zone (10). This problem MUST be fixed before solution can proceed! Done. Preparing mesh for display... Done. What should I do? Any one can help me? thank you.

June 29, 2010, 10:09		#2
Geisel New Member Luk Join Date: Jun 2009 Posts: 24 Rep Power: 16	Change solid into fluid shashanktiwari619, dale154, pranaychowdary and 4 others like this. __________________ *******************************

December 4, 2011, 17:13	fluent warning	#7
sandycbe New Member san Join Date: Dec 2011 Posts: 3 Rep Power: 14	I am using fluent 6.3.26.. I am also getting the error Warning: Flow boundary zone 5 is adjacent to a solid zone (2). This problem MUST be fixed before solution can proceed! Can anybody help me in this... Thanks in advance... Abdulrajak Buradi likes this.

December 4, 2011, 17:24	sandycbe	#8
tejas.khetani New Member Rohan Join Date: Sep 2010 Posts: 8 Rep Power: 15	please try this one,.... Problem setup --> cell zone conditions --> change the zone type of computation domain to fluid. Boreas, Abdulrajak Buradi and Nikoonz like this.

April 8, 2020, 17:36	Thank you so much	#18
Debdoot_X New Member Debdoot Ghosh Join Date: Apr 2020 Posts: 2 Rep Power: 0	It worked!!

September 2, 2010, 20:59		#4
tejas.khetani New Member Rohan Join Date: Sep 2010 Posts: 8 Rep Power: 15	Hey Ringtell, Can you tell me where I am suppose to change Solid into Fluid??? I am asking as I am facing same problem as yours which says Warning: Flow boundary zone 5 is adjacent to a solid zone (2). This problem MUST be fixed before solution can proceed!

September 2, 2010, 22:56		#6
tejas.khetani New Member Rohan Join Date: Sep 2010 Posts: 8 Rep Power: 15	Thanks Man...It worked...

December 4, 2011, 17:33		#9
sandycbe New Member san Join Date: Dec 2011 Posts: 3 Rep Power: 14	but i cant find the problem setup option in fluent 6.3.26... i dont know how to do that... can you help me in this...

December 4, 2011, 23:48		#11
sandycbe New Member san Join Date: Dec 2011 Posts: 3 Rep Power: 14	thank you tejas.khetani....

February 27, 2018, 09:10		#16
Asjad New Member Punjab Join Date: Feb 2016 Posts: 2 Rep Power: 0	has anyone able to solve this problem? I am still getting this error

August 8, 2020, 11:02		#20
Puteri Farah Taslin New Member PUTERI NURFARAH Join Date: Aug 2020 Posts: 1 Rep Power: 0	hi. i cannot find the problem setup in my fluent. mine if 18.1.0 version. please help. thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 14:11
Compilation errors in ThirdPartymallochoard	feng_w	OpenFOAM Installation	1	January 25, 2009 06:59
Add icoLagrangianFoam to FoamX	dyxu	OpenFOAM Running, Solving & CFD	10	June 11, 2008 09:53
FLUENT Warning	Jordi	FLUENT	0	April 21, 2006 04:41
Warning 097-	AB	Siemens	6	November 15, 2004 04:41