Multiphase mass transfer in fluent

mandar · September 22, 2010, 07:56

Does anyone here know how to model a multiphase mass transfer process in fluent..
My problem statement is as follows..

A horizontal water pipeline is directly connected to the vertical gas pipeline...The water is just simply released in the gas pipeline.. The gas is flowing downwards... there is no nozzle...

What inputs are required for these type of mass transfer processes...

Goldsstean · September 23, 2010, 06:05

share something more

mandar · September 23, 2010, 23:44

well the water pipeline has a flow of around 4 m3/hr, and its a 2-in pipe, while the gas is flowing in a big 36-in pipe, and it has a much higher velocity of arnd 40 m3/sec...so the water most probably forms droplets immediately on coming in contact with the gas...

how do i model this in fluent? is there any way i can avoid giving the droplet size, as i cannot find correlations for the size of the droplet which will form for this specific geometry?...i finally want to calculate the mass transfer which occurs from the gas phase to the liquid as there are some gases which need to be absorbed in the water..

September 22, 2010, 07:56	Multiphase mass transfer in fluent	#1
mandar New Member Join Date: Sep 2010 Posts: 3 Rep Power: 15	Does anyone here know how to model a multiphase mass transfer process in fluent.. My problem statement is as follows.. A horizontal water pipeline is directly connected to the vertical gas pipeline...The water is just simply released in the gas pipeline.. The gas is flowing downwards... there is no nozzle... What inputs are required for these type of mass transfer processes...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass transfer in ANSYS	thipps	ANSYS	1	August 29, 2013 11:05
the volumetric mass transfer coefficient in fluent	CHAKER	FLUENT	0	March 16, 2009 07:46
Interphase mass transfer in Eulerian-Lagrangian	Sameer	CFX	0	December 7, 2007 03:49
mass transfer in multiphase(fluent 6.2.16)	masood yooceframandi	FLUENT	0	September 11, 2005 11:45
Vof, udf and mass transfer panel	Jay	FLUENT	1	March 15, 2005 00:29

September 23, 2010, 06:05		#2
Goldsstean Member Amol Ramteke Join Date: May 2009 Location: Kolkata Posts: 30 Rep Power: 16	share something more

September 23, 2010, 23:44		#3
mandar New Member Join Date: Sep 2010 Posts: 3 Rep Power: 15	well the water pipeline has a flow of around 4 m3/hr, and its a 2-in pipe, while the gas is flowing in a big 36-in pipe, and it has a much higher velocity of arnd 40 m3/sec...so the water most probably forms droplets immediately on coming in contact with the gas... how do i model this in fluent? is there any way i can avoid giving the droplet size, as i cannot find correlations for the size of the droplet which will form for this specific geometry?...i finally want to calculate the mass transfer which occurs from the gas phase to the liquid as there are some gases which need to be absorbed in the water..