CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

CFX or FLUENT

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 24, 2010, 07:53
Default CFX or FLUENT
  #1
New Member
 
James
Join Date: Jul 2010
Posts: 25
Rep Power: 15
bramdiff is on a distinguished road
Dear all

I have just started my PhD and need to model a vertical axis turbine. I am new to cfd and would like your advice.

I need to model the turbine flaps opening and closing, they open/close depending on the fluid flow, and are not motor driven. Their movement is restricted to 180 degrees.

My problem is a bit like trying to model the wind blowing a door open, and if the wind was coming from the other direction, it would blow the door shut. my question is how would you model this? is it a fsi problem? or do I have to predict the position of the flaps (not desirable)? I have been told that I would need to write a udf to calculate the movement based on the pressure difference either side of the flap- is this a recommended way of solving this?

I have been advised that either fluent or cfx have this capability, which software do you think is more appropriate? also would i need the icem meshing software as the flaps can move 180 degrees, or would the built in meshing tools be able to handle this?

Any ideas/suggestions are extremely helpful as I am trying to gather as much infomation as possible at the moment.

Many thanks in advance

James
bramdiff is offline   Reply With Quote

Old   October 19, 2010, 14:31
Default
  #2
Senior Member
 
Join Date: Feb 2010
Posts: 148
Rep Power: 17
Jade M is on a distinguished road
About the choice of software, I think that there are several discussions at this site about this. However, I am not sure about the best way to search them out.
One discussion I was involved in is at
Fresher guy seeking some help

I actually had to make this decision about choice of software for my company early this year and recommended CFX. My understanding is that CFX is fully integrated into Workbench while Fluent is not. Except for some specialized work such as shocks or multiphase, then Fluent may not be needed. To understand the modelling capabilities of each software, see the capabilities chart for 12.0 at
http://www.ansys.com/assets/brochure...ities-12.0.pdf

The capabilities chart for 13.0 is at
http://www.ansys.com/assets/brochure...ties-chart.pdf

None of this will be an issue in the next release (Version 13.0) when Workbench will have a single CFD package, as another user stated.

Correction, the ANSYS folks just visited and indicated that there will not be a single CFD package until Version 14.0.

Good luck!

Last edited by Jade M; November 16, 2010 at 14:42.
Jade M is offline   Reply With Quote

Old   November 10, 2010, 06:49
Default open source MFIX
  #3
New Member
 
enssay
Join Date: Oct 2009
Posts: 2
Rep Power: 0
enssay is on a distinguished road
Dear all

I need to model combustion in a fluidized bed reactor. I am new to cfd and would like to download the open source MFIX.

Can you help me.

Thank you in advance
enssay is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX or FLuent? michelle CFX 7 June 10, 2014 08:38
Fluent or CFX - strenghts, weaknesses? Riaan Main CFD Forum 8 March 15, 2010 06:32
OpenFOAM vs. Fluent & CFX marco Main CFD Forum 81 March 31, 2009 15:22
Fluent Vs CFX, density and pressure Omer CFX 9 June 28, 2007 05:13
Jobs in cfd - fluent or cfx? jobman Main CFD Forum 6 July 5, 2006 16:02


All times are GMT -4. The time now is 08:58.