CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Eliminating block surfaces from imported mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 18, 2010, 07:10
Question Eliminating block surfaces from imported mesh
  #1
Member
 
m.maneshi's Avatar
 
Mehdi
Join Date: Oct 2009
Posts: 61
Rep Power: 16
m.maneshi is on a distinguished road
Hello all,
i created a mesh in Numeca Igg mesh to export it in CGNS format and solve it later in ansys CFX ,donig that i created multiple blocks. when i import the mesh in cfx there are lots of faces ( blocks' faces) which must be eliminated automatically but they are not. on the other hand because there are about 500 faces it is impossible to define them as interface manually. what should i do ?

Thx
m.maneshi is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Hexa mesh, curve mesh setup, bunching law Anorky ANSYS Meshing & Geometry 4 November 12, 2014 01:27
[Commercial meshers] Icem Mesh to Foam jphandrigan OpenFOAM Meshing & Mesh Conversion 4 March 9, 2010 03:58
[snappyHexMesh] external flow with snappyHexMesh chelvistero OpenFOAM Meshing & Mesh Conversion 11 January 15, 2010 20:43
[mesh manipulation] TranformPoints gives skewed mesh Possible Bug andersking OpenFOAM Meshing & Mesh Conversion 3 March 25, 2008 22:33
unstructured vs. structured grids Frank Muldoon Main CFD Forum 1 January 5, 1999 11:09


All times are GMT -4. The time now is 05:01.