|December 3, 2010, 17:40||
ANSYS APDL-contact macro !!!
Join Date: Aug 2009
Posts: 58Rep Power: 6
Can somebody help me, or can offer some support in my next necessity:
-to made a macro which can detect automatically all surfaces or lines (must have possibility to choose only one of them) in contact;
-gap betweens surfaces in contact must can be tolerated (0 -> ...+);
-only on surfaces whose distance is between the tolerances will be selected and made with her contact (contact + target);
-if will be added in FEM model supplementary geometry, the existing contact must be ignored and added supplementary contacts (without influence the already existing contact);
-contact type made by default must be bonded contact with criterion Pure Penalty;
-the generated contact must be recognized be contact pair, and must appear on contact pair;
This macro have own role to reduce hard work in ANSYS APDL.
I appreciate all support, any idea or suggestion which can help me to resolve my macro.
Mess with the best die like the rest ... ANSYS is the best !!!
|Thread||Thread Starter||Forum||Replies||Last Post|
|Problem with modelling contact in ansys fluent 12.1||mak86||FLUENT||12||December 3, 2013 21:26|
|Exporting fluent melting/solidification model results to ansys mechanical apdl||omair11||ANSYS||3||August 28, 2013 07:22|
|Ansys Workbench contact problem!||JoelHenrik||ANSYS||1||October 1, 2010 15:57|
|ANSYS Mechanical APDL||mechanicaldesign||ANSYS||0||April 26, 2010 10:24|
|Macro command combatibility ANSYS workbench||Tassos||CFX||2||February 29, 2008 11:02|