CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS

Input arguments not accepting real

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 8, 2011, 08:36
Default Input arguments not accepting real
  #1
New Member
 
Enio Carpi
Join Date: Apr 2010
Posts: 12
Rep Power: 7
MrFEA is on a distinguished road
Hi Folks,

I'm using commands to define material properties. The problem is that I can't input real number in the GUI, e.g., a 0.01 is listed as 0. I tried 1E-2, but didn't work. Tried to defined the input as parameters, didn't accept neither.

I'm at a loss. What am I missing here?

Thanks
MrFEA is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
error: uninitialized local variable 't' used MASOUD Fluent UDF and Scheme Programming 3 November 26, 2012 06:24
how to hook this udf shanu FLUENT 1 August 26, 2011 10:48
defining a term for a domain using DEFINE_ADJUST MASOUD Fluent UDF and Scheme Programming 1 September 24, 2010 05:08
enum MASOUD Fluent UDF and Scheme Programming 0 June 5, 2010 00:49
udf error Rashmi FLUENT 0 December 27, 2005 06:35


All times are GMT -4. The time now is 07:42.