CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   problem opening a cfx definition file with fluent (http://www.cfd-online.com/Forums/ansys/85173-problem-opening-cfx-definition-file-fluent.html)

samaras387tasos February 18, 2011 16:28

problem opening a cfx definition file with fluent
 
HELLO TO ALL OF YOU,
I HAVE A PROBLEM IN LOADING A CFX DEF FILE TO FLUENT.
I PRESS "IMPORT->CFX->DEFINITION FILE" AND IT STARTS LOADING THE FILE BUT THEN DISPLAYS THE FOLLOWING ERROR
Reading "\"| utility fe2ram -tCFXD -d3 -m1e-08 \"\"C:\Documents and Settings asos\6ORUN\6orun.def\"\"\""...

Error: bad syntax. Usage:
utility fe2ram dimension read_format zoning write_format [inputfile [outputfile]]
dimension: [-d2 | -d3 | -surface]
read_format: [-tANSYS | -tCFX | -tCFXD | -tCFXR | -tCGNS |
read_format: [-tANSYS | -tCFX | -tCFXD | -tCFXR | -tCGNS |
-tFIDAP7 | -tFLUENT4 | -tFLUENT4UNI | -tGAMBIT | -tHYPER |

NOTE: I FIRST LOADED A MESH FILE
DOES ANYONE KNOW WHAT THIS ERROR MEANS?
WHAT CAN I DO TO FIX THAT?


All times are GMT -4. The time now is 23:03.