CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Turbulent Boundary Layer on flat plate

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 19, 2011, 08:34
Question Turbulent Boundary Layer on flat plate
  #1
New Member
 
Join Date: Nov 2010
Posts: 4
Rep Power: 15
samygero is on a distinguished road
Hello,

I am trying to simulate a boundary layer on flat plate in a 3D space.

My model consists of a "brick" volume with geometric caracteristics 124x44x22, with one velocity inlet of 8.3 m/s, a pressure outlet, 3 symetries and one wall.

I have meshed my model using gambit 2.4.6, with hexaedric elements. When I do not use the boundary layer on the wall the calculations in Fluent, with the k-epsilon model, converge.

When I do use a boundary layer with the distance to first node of 0.01m and standart wall functions the calculations do not converge at all even after 400 iterations.

I do not have any clue why. My Reynolds number is in the order of magnitude of 10^5 , i have chosen y+=30 and the fluid is air.

Can somebody help me?
samygero is offline   Reply With Quote

Old   May 7, 2011, 22:02
Default
  #2
New Member
 
Join Date: Jan 2011
Posts: 25
Rep Power: 15
zhenglun.wei is on a distinguished road
what's the length of your plate?
zhenglun.wei is offline   Reply With Quote

Old   May 31, 2011, 10:53
Default
  #3
Member
 
Christa
Join Date: Apr 2011
Posts: 53
Rep Power: 14
user_of_cfx is on a distinguished road
Are you sure your y+ is appropriate for this kind of simulation? I simulate turbulent boundary layers and I use a RANS-based model, and I am aiming for a y+ which is less than 2.

The thing with turbulent boundary layers is that there is a very thin viscous (or laminar) sub-layer which is in contact with the boundary wall. In order for a simulation to give accurate results, the first row of elements from the wall need to be embedded entirely inside this viscous sublayer, hence the small value of y+.

In this link you can find how to calculate the thickness of your first row of elements given your maximum (not average!) Re and your length scale (I work with tubes so I choose the diameter as my length scale):
http://geolab.larc.nasa.gov/APPS/YPlus/

Hope it helps.
user_of_cfx is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15
Turbulent Flat Plate Validation Case Jonas Larsson Main CFD Forum 0 April 2, 2004 11:25
New topic on same subject - Flow around race car Tudor Miron CFX 15 April 2, 2004 07:18
For turbulent boundary layer Orion Main CFD Forum 1 January 2, 2003 23:45


All times are GMT -4. The time now is 03:13.