CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Compatibility between 13.0 and 12.1 (http://www.cfd-online.com/Forums/ansys/85852-compatibility-between-13-0-12-1-a.html)

Tim72 March 8, 2011 11:37

Compatibility between 13.0 and 12.1
 
Hello to everybody,

I have been having some issues with the ANSYS 13.0 it was running fine then the dreaded “AnsysWBU.exe recountered a problem” error started to appear and “no connection could be made because the target machine actively refused it” – when I try to open/update the project meshes.

(This machine is purely for modelling so offline with no antivirus/firewall etc)

I have been trying to trouble shot the error for some time now with no joy so and have decided to go back to trusty 12.1 which is running no problem ;)

Obviously I don’t want to lose all the analysis and work which was done in 13.0 I am therefore inquiring how I may be able to save projects in 13.0 so they can be opened in 12.1? :confused:

Thank you in advance for your support

Best regards

rafiktharwat April 7, 2011 15:53

I have the same problem PLZ help

Ghayoumi June 4, 2011 05:00

ansyswbu.exe error
 
Hi,
I have this problem, too.

HELP PLEASE.

:confused:

Ghayoumi June 4, 2011 05:09

Tim 72 !

I work between 12 and 13 , you can use your ansys v13 Data in v12 and inverse.

please if you can solve our previous problem, inform us.

mishikhan July 2, 2011 07:05

Quote:

Originally Posted by Tim72 (Post 298455)
Hello to everybody,

I have been having some issues with the ANSYS 13.0 it was running fine then the dreaded “AnsysWBU.exe recountered a problem” error started to appear and “no connection could be made because the target machine actively refused it” – when I try to open/update the project meshes.

(This machine is purely for modelling so offline with no antivirus/firewall etc)

I have been trying to trouble shot the error for some time now with no joy so and have decided to go back to trusty 12.1 which is running no problem ;)

Obviously I don’t want to lose all the analysis and work which was done in 13.0 I am therefore inquiring how I may be able to save projects in 13.0 so they can be opened in 12.1? :confused:

Thank you in advance for your support

Best regards


May I know that the analysis work you have already done was on the same system or on some other system. Also can you give some specs of your system?? (e.g OS? bit? Ram? # of processor core etc etc.)


All times are GMT -4. The time now is 02:43.