CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Separate surfaces in DesignModeller 12 (http://www.cfd-online.com/Forums/ansys/86600-separate-surfaces-designmodeller-12-a.html)

ckbenjamin March 28, 2011 03:07

Separate surfaces in DesignModeller 12
 
I created 2 squares next to each other with one side in common.
I extruded them one by one, to the same height.
Is it possible for me to specify such that they do not merge and share common surfaces?
I want my block to have 10 unique selectable sides so I can insert different boundary conditions later.

swiss_zhang August 4, 2011 07:55

Try to Imprint Surface Function:

1: create a line

2 Extrude this line with Imprint Surface

and this line will cut your box or block in different part you want

rae September 19, 2011 20:51

ben, I'm going to experiment with imprint today, but the trick I just worked out yesterday is to freeze the first body before allowing the 2nd to contact it - and that includes extruding a 2nd body to or from it.


All times are GMT -4. The time now is 11:24.