Home > Forums > Software User Forums > ANSYS

FloWizard

Mark Forums Read

Reply

Search this Thread

April 15, 2011, 13:59	FloWizard	#1
nat79 New Member Join Date: Apr 2011 Posts: 2 Rep Power: 0	Hi, I'm new to CFD and am just learning FloWizard. The results summary provides values for Pressure Drop and Total Pressure Drop. Where I'm confused is the Total Pressure drop is lower than the Static Pressure drop, i.e. Total deltaP = 9kPa, but Static deltaP id 11.9kPa. Total Pressure = Static Pressure + Dynamic Pressure Is it because losses are occuring and not getting pressure recovery??? Sorry if this is a dumb question.....

Reply

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flowizard going to be terminated?	bramv101	FLUENT	0	November 19, 2009 04:12
FloWizard & Fluent	Valerio	FLUENT	3	March 16, 2008 20:12
FloWizard analogs	Josh Kjenner	Main CFD Forum	1	January 4, 2008 05:30
FloWizard .dbs-file to CGNS?	Anders	FLUENT	2	October 21, 2007 09:10
FloWizard - problems in meshing	Mark	FLUENT	0	June 21, 2006 05:55

All times are GMT -4. The time now is 23:34.