CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   Interfaces for combining meshes (http://www.cfd-online.com/Forums/ansys/90296-interfaces-combining-meshes.html)

rbarrett July 6, 2011 11:40

Interfaces for combining meshes
 
Hi all,

In order to generate an appropriate mesh, I split my fluid domain into two separate meshes. I was wondering how I would go about applying a basic interface that will allow me model the two meshes as one region, i.e. as a continuous fluid. The mesh is also deforming.


All times are GMT -4. The time now is 14:15.