Saved in Workbench 32 bit, open in Workbench 64 bit.

Black Ni · July 26, 2011, 16:44

I am wondering if it is possible to create, simulate and save a project in ANSYS Workbench 32 bit version and open the project in 64 bit.

I hava a stationary now that I am running ANSYS Workbench32 bit on and in between simulations it would be nice to play with the results on my laptop which is a 64 bit system. Hence my question.

Max Efficiency · July 28, 2011, 03:59

This should be no problem. I am working with Ansys 32 bit and 64 bit, as well. I can change between both systems as often as I like. No problems occure during that procedure.

Edit:
Although it is possible to start a run on 32 bit system, stop it and continue it on the 64 bit system. And the other way round, of course.

But be careful: When you have large simulations/meshes it sometimes only work with 64 bit systems. For example when there is more than 2 GB memory required for the solving process.

Black Ni · July 28, 2011, 09:32

Thank you very much for your detailed reply.

I am running all the simulations on the 32 bit system so I should not have any problems.

July 26, 2011, 16:44	Saved in Workbench 32 bit, open in Workbench 64 bit.	#1
Black Ni New Member Join Date: Jul 2011 Posts: 4 Rep Power: 14	I am wondering if it is possible to create, simulate and save a project in ANSYS Workbench 32 bit version and open the project in 64 bit. I hava a stationary now that I am running ANSYS Workbench32 bit on and in between simulations it would be nice to play with the results on my laptop which is a 64 bit system. Hence my question.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wmake compiling new solver	mksca	OpenFOAM Programming & Development	14	June 22, 2018 06:29
pisoFoam compiling error with OF 1.7.1 on MAC OSX	Greg Givogue	OpenFOAM Programming & Development	3	March 4, 2011 17:18
Problem installing on Ubuntu 9.10 -> 'Cannot open : No such file or directory'	mfiandor	OpenFOAM Installation	2	January 25, 2010 09:50
Version 15 on Mac OS X	gschaider	OpenFOAM Installation	113	December 2, 2009 10:23
OpenFOAM with IBM AIX	matthias	OpenFOAM Installation	20	March 25, 2008 02:36

July 28, 2011, 03:59		#2
Max Efficiency New Member Join Date: May 2010 Posts: 24 Rep Power: 15	This should be no problem. I am working with Ansys 32 bit and 64 bit, as well. I can change between both systems as often as I like. No problems occure during that procedure. Edit: Although it is possible to start a run on 32 bit system, stop it and continue it on the 64 bit system. And the other way round, of course. But be careful: When you have large simulations/meshes it sometimes only work with 64 bit systems. For example when there is more than 2 GB memory required for the solving process.

July 28, 2011, 09:32		#3
Black Ni New Member Join Date: Jul 2011 Posts: 4 Rep Power: 14	Thank you very much for your detailed reply. I am running all the simulations on the 32 bit system so I should not have any problems.