CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   problem with interface in heat conduction (http://www.cfd-online.com/Forums/ansys/93355-problem-interface-heat-conduction.html)

josefguerreroj October 12, 2011 11:53

problem with interface in heat conduction
 
I'm having problems defining the interface in heat conduction using polydata a Polyflow's modulus, in the image you can see that in can't define the interface .

Is a problem in the geometry or the meshing? , please help me
http://i53.tinypic.com/2m4sqav.jpg[/IMG]

zengxiangli June 8, 2013 21:19

problem with interface in heat conduction
 
the reason is that the model is not "one part"!

you should modify your model by DesignModeler,select "bodies" and form a "part" by Tools>Form a part


All times are GMT -4. The time now is 18:22.