CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS

convection liquid-solid interfase

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 24, 2011, 10:34
Default convection liquid-solid interfase
  #1
New Member
 
CFD
Join Date: Nov 2011
Posts: 1
Rep Power: 0
cfd_ is on a distinguished road
I created a liquid-solid interface in CFX. But now I want to prescribe the heat transfer coefficient for the liquid. However this parameter is calculated with the simulation. Does anyone know if there is a way to prescribe it or if it is possible to change the calculation method of it?

With kind regards,
CFD_
cfd_ is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
heat conduction in solid and convection in flow kunal FLUENT 3 February 29, 2012 05:42
solid liquid phase change (melting/solidification) ernane CFX 0 February 3, 2009 15:24
Shacking CAN VOF HEAT LIQUID SOLID Optixxx FLUENT 0 July 30, 2005 12:42
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19
free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin Kaushik FLUENT 1 May 8, 2000 07:47


All times are GMT -4. The time now is 05:38.