CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS (http://www.cfd-online.com/Forums/ansys/)
-   -   from ICEM to CFX, there's some part missing, please help (http://www.cfd-online.com/Forums/ansys/95924-icem-cfx-theres-some-part-missing-please-help.html)

octorisca January 8, 2012 00:11

from ICEM to CFX, there's some part missing, please help
 
i can't speak english very well, so forgive me if my explanation is bad.
or my grammar is terrible. :D

oke,, please help me,,

this is my unstructures mesh
http://media.tumblr.com/tumblr_lxgosmzFEC1qcuk3t.jpg

isn't it right?

but, after i eksport to CFX, there's some part missing,,
http://media.tumblr.com/tumblr_lxgotg6wsD1qcuk3t.jpg

the part missing .
http://media.tumblr.com/tumblr_lxgot6thlX1qcuk3t.jpg

why? what should i do?
please help me thanks,.:D

Far January 8, 2012 11:19

rename the body to body1 and body2 and these be enabled in part list!!!

octorisca January 9, 2012 08:27

Quote:

Originally Posted by Far (Post 338329)
rename the body to body1 and body2 and these be enabled in part list!!!

thanks for the help...
I've done in accordance with your suggestion, but remains unchanged,,
the parts still missing..

what shoud i do now?

mahesh_1402 February 1, 2012 14:35

is that part is connected with other part?
if not then define it as internal wall in icem in part mesh set up.

TheBearJew February 2, 2012 02:07

Please, show us the icem tree before exporting.


All times are GMT -4. The time now is 06:15.