CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

while reading mesh and converting to polyhedra...

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 10, 2012, 15:51
Default while reading mesh and converting to polyhedra...
  #1
Senior Member
 
Emre G
Join Date: May 2011
Location: Turkey
Posts: 126
Rep Power: 14
emreg is on a distinguished road
Hi,

i am getting that message while reading mesh or converting current mesh to polyhedra..

MPI Application rank 1 exited before MPI_Finalize() with status -1073741819
999999 (..\src\mpsystem.c@1149): mpt_read: failed: errno = 10054
999999: mpt_read: error: read failed trying to read 4 bytes: Invalid argument
The Parallel FLUENT process could not be started.


why does it occur?


thanks,
emre
emreg is offline   Reply With Quote

Old   February 10, 2012, 18:18
Default
  #2
Senior Member
 
Emre G
Join Date: May 2011
Location: Turkey
Posts: 126
Rep Power: 14
emreg is on a distinguished road
solved !

was a RAM problem....

Last edited by emreg; February 18, 2012 at 16:18.
emreg is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Polyhedra and sliding mesh? rockewan FLUENT 5 December 1, 2018 20:07
[Commercial meshers] Problem converting fluent mesh vinz OpenFOAM Meshing & Mesh Conversion 28 October 12, 2015 07:37
[Gmsh] 2D Mesh Generation Tutorial for GMSH aeroslacker OpenFOAM Meshing & Mesh Conversion 12 January 19, 2012 04:52
Converting Starccm+ mesh Ladnam OpenFOAM 0 September 14, 2011 07:30
[Commercial meshers] Converting a mesh with splitted cells using fluentMeshToFoam jlpelerin OpenFOAM Meshing & Mesh Conversion 4 April 25, 2011 17:56


All times are GMT -4. The time now is 22:01.