CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

Help with modelling a solid within a fluid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 11, 2012, 10:57
Default Help with modelling a solid within a fluid
  #1
New Member
 
Join Date: Feb 2012
Posts: 13
Rep Power: 14
MJ55 is on a distinguished road
Hi all,

I would like to ask for some help with a simulation I need to do.

I have a rectangular wind tunnel with air flowing through at a velocity of 10m/s

Inside the wind tunnel I need to include a small ball, like a tennis ball.

I would like to simulate the ball travelling through the wind tunnel due to the velocity of the wind whilst also dropping down due to gravitational acceleration.

How would I go about doing this? In particular I am unsure of the following things:

1) Do I assign the ball its own body and mesh?
2) Is it a multi-phase case with the fluid and ball being simulated as separate entities? If so how would I do this?
3) How do I go about including gravity in my simulation

Also I am using ICEM for meshing and CFX for the simulation.

Many thanks
MJ55 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Solid to Fluid Heat Transfer Modelling Problem bortonj88 Main CFD Forum 3 November 14, 2011 15:21
Solid Fluid Interface boundary problems shankara.2 ANSYS Meshing & Geometry 0 April 22, 2009 17:05
fluid structure interaction taru agrawal FLUENT 4 September 10, 2007 04:12
Modeling of solid domains in fluent, no fluid flow Satish Perivilli FLUENT 2 December 1, 2005 12:41
Terrible Mistake In Fluid Dynamics History Abhi Main CFD Forum 12 July 8, 2002 10:11


All times are GMT -4. The time now is 23:25.