CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS (https://www.cfd-online.com/Forums/ansys/)
-   -   I can't install ANSYS 14 (https://www.cfd-online.com/Forums/ansys/97206-i-cant-install-ansys-14-a.html)

adib February 11, 2012 11:10
I can't install ANSYS 14
 
I'm using 64 bit laptop and the ANSYS 14 is the 64 bit version.
However, when I run the setup the link to install Parallel Processing & License Manager is not active as shown in the file attached.
But, when I run this setup in 32 bit laptop, it is active.
Please help! :confused:

svramusi February 25, 2012 21:38
I don't see any attached file, but it sounds like you don't have administrative privileges on your machine. If you're using Windows Vista/7 and are admin, perhaps you have UAC turned on. If you're using UAC, please right click on setup, and 'Run as Administrator'.

imnull March 5, 2012 15:10
Quote:
Originally Posted by svramusi (Post 346308)
I don't see any attached file, but it sounds like you don't have administrative privileges on your machine. If you're using Windows Vista/7 and are admin, perhaps you have UAC turned on. If you're using UAC, please right click on setup, and 'Run as Administrator'.
100% agree with ADM poit. have same issue in the past.
so go My Comuter/computer management/local users and groups/user/... fix the administration (or google for help).

svramusi March 5, 2012 22:22
Quote:
Originally Posted by imnull (Post 347785)
100% agree with ADM poit. have same issue in the past.
so go My Comuter/computer management/local users and groups/user/... fix the administration (or google for help).
So by doing this you turned UAC off?

imnull March 5, 2012 22:50
Quote:
Originally Posted by svramusi (Post 347823)
So by doing this you turned UAC off?
I did so .. works ok


All times are GMT -4. The time now is 21:38.