CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS (https://www.cfd-online.com/Forums/ansys/)
-   -   Feasibility of exporting solution from Ansys to a structured grid (https://www.cfd-online.com/Forums/ansys/99079-feasibility-exporting-solution-ansys-structured-grid.html)

ni3d4888 March 26, 2012 01:52

Feasibility of exporting solution from Ansys to a structured grid
 
My requirement is to have a RANS solution from Ansys as the initial condition for a large eddy simulation code based on finite difference schemes (which uses structured grids). I do understand that data storage of unstructured meshes is a lot different than structured ones, even though I am unaware of the details. But I would like to get your opinions on whether this is possible at all and if yes, any guidelines/references would be greatly appreciated.

(Note: I will use the same strutured grid that the LES code uses for Ansys. I understand that Ansys will interpret it differently.)

Thank you.


All times are GMT -4. The time now is 08:46.